Pier Supported Drive Assemblies Model 428HP2
Model 428HP2
Output Torque (Note 1): 42,000 ft-lbs (56,900 N-m)
Drive Motor: 3/4 hp
Approximate Spur Gear Weight: 2,750 lbs
Collector |
Nominal Diameter |
Mechanism Tip Speed (Note 2) |
| 85 ft |
8.1 ft/min |
0.0305 rpm |
| 90 ft |
8.5 ft/min |
0.0305 rpm |
| 95 ft |
9.0 ft/min |
0.0305 rpm |
| 100 ft |
9.5 ft/min |
0.0305 rpm |
| 105 ft |
10.0 ft/min |
0.0305 rpm |
| 110 ft |
10.5 ft/min |
0.0305 rpm |
Notes:
- Defined as: Maximum Continuous 20 Year Rated Output Torque
- Tip Speed calculated at Mechanism diameter = 12" less than Collector Nominal Diameter
- These Pier Supported drive units are not recommended for use on clarifier mechanism with diameter greater than the range listed in the table above.
|
 |
Click here to return to
Drive Page